Featured Company:

Dremel 290-05 120-Volt Engraver Industrial

Today's shopping tips: "Be wise in purchasing ..... find best value one"

---

Manufacturer: Dremel
Brand: Dremel
List Price: $37.90
Our Price: $16.30
You Save: $ 21.60 ( 57% )
(prices subject to change)
Availability: Usually ships in 24 hours

Average Ratings:

The Dremel 290-05 is ideal for identifying and personalizing your valuables as well as decorative engraving, Engraves wood, leather, tools, machinery, hard steel, stone, glass, ceramics, porcelain, plastics, and more, 115V, AC, 60 Hz, 0.2 amps, 7,200 strokes per minute.


DESCRIPTION:

Binding: Tools & Hardware
Brand: Dremel
EAN: 0080596027377
Feature: Frequency - 60.0 Hz
Label: Dremel
Manufacturer: Dremel
Model: 290-05
Publisher: Dremel
Studio: Dremel


FEATURES:

• Frequency - 60.0 Hz
• Power Source - Electric
• Cycle Rate - 7200 strokes/min [Max]
• Voltage - 115.00 VAC
• Includes - (3) 9924 Carbide Engraving Points



ACCESSORIES:

• Dremel 225 Flex Shaft Attachment
• Dremel 231 Shaper/Router Table
• Dremel 692 6-Piece Router Bit Set
• Dremel 220-01 Rotary Tool Work Station
• Dremel 757-01 7.2-Volt MultiPro Battery


SIMILAR ITEMS:

• Dremel 9929 Engraver Diamond Point Bit
• Dremel 9924 Engraver Carbide Point Bit
• Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
• Diamond Burr Set - 1/8", 20Pc
• Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template


CUSTOMER REVIEWS:

Customer Rating:
Summary: Very disappointed
Comment: I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.

Customer Rating:
Summary: good tool
Comment: I have only used this tool a few times, but it has worked very well.
I was surprised at how thick of a piece of metal it will make a cut in.

Customer Rating:
Summary: great tool
Comment: great little unit! works on all metals including saw blades and router bits. I am using the diamond tip with it. powerfull and not too loud. glad i own it.

---

NOTE: All online transactions are processed at Amazon.com's secure server, using the latest technology on internet's secure transactions.
| Blocks | Building Sets | Model Toys | Puzzles | Figures & Playsets | Toys by Age Ranges |